Brushless Outrunners

10mm 2g | 14mm 5gm | 18mm 10gm | AP02 | AP03 | AP05 | Firewall Mount for APxx Motors | A1504


Click on image for a larger version.
10mm 2gm Micro Brushless Outrunner
(Top | 14mm 5gm | 18mm 10gm | AP02 | AP03 | AP05 | Firewall Mount for APxx Motors | A1504)

An amazing micro size brushless motor for 1 cell LiPo. Thrust is approx 20g with a Plantraco TriTurbo prop.

The motor has plain bushed bearings (no ballrace) so it needs frequent but light oiling. The XP-3A 1S ESC is an ideal match.

Max current:2A
KV:7700 RPM/V
Size:10mm dia, 25mm long
Weight:2g
Shaft dia:1mm
Recommended cell count:1s Lipo
Recommended prop:Plantraco TriTurbo (or GWS 3x2 - requires sleeving to fit 1mm shaft)
Some performance data:
PropCurrent(A)Thrust
GWS25101.314.5g
TriTurbo1.5521.4g
U-801.6823.4g
MCF32221.7224.6g

£ 12.95

Click on image for a larger version.
14mm 5gm Micro Brushless Motor (2500Kv)
(Top | 10mm 2g | 18mm 10gm | AP02 | AP03 | AP05 | Firewall Mount for APxx Motors | A1504)

This motor is ideal for indoor models of 50g-70g auw. With only 5.2gms weight and 20w of power it spins a 4x2.5 to 5x3 prop giving 80gm of thrust.

Motor is supplied with a motor mount and prop saver adapter; other prop adapters can be found here. Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm pin space plug/socket.

Max current:3A
Size:14mm dia, 25mm long (incl mount & shaft)
Weight:5.2g
Shaft dia:1.5mm
Recommended cell count:2s Lipo
Recommended prop:5x4.3

£ 11.95

Click on image for a larger version.
18mm 10gm Micro Brushless Outrunner
(Top | 10mm 2g | 14mm 5gm | AP02 | AP03 | AP05 | Firewall Mount for APxx Motors | A1504)

This motor is ideal for indoor or lightweight outdoor models (e.g. the Stevens Aero 'Diddle' and Parkscale Whim ranges). With only 9.2gms weight and a decent 40w of power it spins a 6x5 to 7x3.5 props with ease gives 140gm of thrust.

Motor is supplied with a motor mount and prop saver adapter; other prop adapters can be found here. Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm pin space plug/socket.

The motor mount grub screw requires a 1.27mm hex key and the grub screw in the end-bell securing the shaft requires a 0.9mm hex key.

KV:1700, 2000, 2900, or 3800 RPM/V
Max current:6A
Size:18mm dia, 30mm long (incl mount & shaft)
Weight:10g
Shaft dia:2mm
Recommended cell count:2s Lipo
Recommended prop:7x6 to 8x4.3 (1700Kv), 6x5 to 7x3.5 (2000Kv), 4x2.5 to 5x5 (2900Kv), 3x3 to 4x4 (3800Kv)

£ 11.50 Select Kv:

Click on image for a larger version.
AP02 2g Micro Brushless Motor
(Top | 10mm 2g | 14mm 5gm | 18mm 10gm | AP03 | AP05 | Firewall Mount for APxx Motors | A1504)

A 2g motor designed for single LiPo cell operation. A GWS 3x2 prop gives 27g thrust at 1.8A.

Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm pin space plug/socket.

£ 17.45

AP03 Micro Brushless Motor
(Top | 10mm 2g | 14mm 5gm | 18mm 10gm | AP02 | AP05 | Firewall Mount for APxx Motors | A1504)

A superb 3g outrunner for 1S (7500Kv) or 2S (4000Kv) operation. Ballraced shaft for smooth running and long life. Ultra-light stator for fast response - ideal for micro-sized 3D models.

The GWS 3" props are a tight push fit onto the AP03 1.5mm shaft, a reamer is available. The GWS 4" props require a prop adapter: either the push-on collet adapter or the prop saver. Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm pin space plug/socket.

Select wind:

Click on image for a larger version.
AP05 Micro Brushless Motor
(Top | 10mm 2g | 14mm 5gm | 18mm 10gm | AP02 | AP03 | Firewall Mount for APxx Motors | A1504)

A 5g motor designed for 1S and 2S operation with winds of 5000Kv and 3000Kv. With a GWS 5x3 prop, the 3000Kv motor gives 45g thrust on 1S or 110g on 2S.

The AP05 is supplied with a prop saver adapter. The push-on collet adapter may also be used for a rigid prop mounting (suitable for GWS 4" and 5" props).

Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm pin space plug/socket.

Select wind:

A pack of 10 o-rings for the AP05 prop saver is available: £ 1.15

.


Click on image for a larger version.
Firewall Mount for APxx Motors
(Top | 10mm 2g | 14mm 5gm | 18mm 10gm | AP02 | AP03 | AP05 | A1504)

A three part firewall mount for APxx micro motors (AP02, AP03 and AP05). Lightness and strength is provided by the ply-balsa-ply sandwich construction. The mount kit includes 3 self tapping screws.

£ 1.25

Click on image for a larger version.
A1504-18 (2900Kv)
(Top | 10mm 2g | 14mm 5gm | 18mm 10gm | AP02 | AP03 | AP05 | Firewall Mount for APxx Motors)

A micro motor suitable for small light indoor models this is a very popular motor designed for use on two LiPo cells. Similar in size, weight and power to the E-flite Park 180.

  • Number of Cells: 2-3s lipo
  • Max Efficiency Current: 2-4A
  • Max Current: 5A/60s
  • Max Efficiency: 75%
  • Shaft Size: 2.0mm
  • Poles: 14
  • Weight: 13g
  • Max watts: 55W
  • Motor Dimensions: 18x12 (mm)
  • Minimum Recommended ESC: 6A
  • Recommended prop size on 2s: GWS 4530 (4.5x3) or 5030 (5x3)

£ 12.50

© Micron Radio Control