Rx61 DSM2/DSMX 16V 9 Channel Receiver with Bi-Directional ESC
Rx61 is a 9 channel (1 ESC, 8 'P') DSM2/DSMX compatible micro receiver designed for use in surface vehicle: cars, boats and train locomotives. The receiver is designed to operate from 3-13v DC. This allows it to be used with many battery combinations. 1S, 2S and 3S lipos are common choices (3S = 3 cells in series).
The motor output (H1) can supply up to 1.3A when the motor is stalled at 100% throttle.
The receiver is available as a bare board with 2.54mm pad space for ease of soldering and with lead-out wires for battery and motor. Please
contact us if you need wiring for other receiver outputs - e.g. servo/switch channels.
Size: 22.5 x 12 x 4.0 mm
Weight: 0.85 gm
Voltage Range: 3V - 13V
Max Current: 1.3A
wiring adds 0.5gm ~ 1gm to the bare board weight Rx6x Receiver Features
The Rx61 receiver is available in 7 variants to suit the model usage and type of transmitter. All functions are programmable, these variants are selected function configurations:
Rx61-1 Rx61-2 Rx61-22 Rx61-3 Rx61-4 Rx61-5 Rx61-6
Usage: train with joystick Tx train with Tx21 train with Tx22/ Tx24 cars/boats with Tx24 cars with joystick Tx for DX3 Tx boats with joystick Tx
Motor: low off(ch1) centre off(ch1) centre off(ch1) centre off(ch1) centre off(ch1) centre off(ch1) centre off(ch1)
Direction: Yes(ch3) No No No No No No
On/off chan: 7 7 7 0 6 6 5
Servo chan: 1 1 1 8 2 2 3
Selecta: - - Enabled - - - -
Instructions: Rx61-1 Rx61-2 Rx61-22 Rx61-3 Rx61-4 Rx61-5 Rx61-6
All versions of the Rx61 are the same hardware, the only difference is the program settings. The Rx61 settings can be changed in the usual fashion via waggling the sticks of a standard Tx or the
PROG3 / PROG4 programmer may be used. A guide to setup using a standard Tx is available here.
The 'Direction' feature in the table above indicates whether the receiver ESC uses the throttle (chan 1) as a centre-off or full-range control. Centre-off is the default setting for most variants. When configured for full-range (by programming), a seperate channel is used to set the ESC direction - this is channel 3 for the Tx2x railway controllers.
Receiver Variation, Antenna, Connector and Daughter Board Options:
1: train with joystick Tx
2: train with Tx20/Tx21
22: train with Tx22/Tx24
3: general purpose
4: car with joystick Tx
5: car with DX3
6: boat with joystick Rx
throttle control method applies only to -2 and -22 variants
full-range and dir switch
no power leads
100mm battery & motor leads : +
£2.00 100mm battery & motor leads & JST-PH 2pin battery connector : +
£3.00 100mm battery & motor leads & red JST battery connector : + £3.00 Heatshink Cover:
applied to board
Other wiring options are available (e.g. lead-out wires for the 'P' channels) - please
enquire sending details of how you wish to use Rx61.
There are currently
Click deselect to cancel all option selections.
Base Price: £ 32.00