Micron R/C will be closed for a break from Monday 23rd July through Friday 27th July. Orders may be processed sporadically during the close but we cannot guarantee that any order placed after 3pm on Friday 20th July will be processed before Monday 30th July. If you need something urgently while we are closed, please use email to contact us.

Sound Modules

Mtroniks digiSound | MyLocoSound Large Scale Sound Module

A selection of synthesised sound modules for model boats and rail. Suitable speakers are on a separate page.

Click on image for a larger version.
Mtroniks digiSound
(Top | MyLocoSound Large Scale Sound Module)

The Mtroniks digiSound modules are 100% waterproof, plug-n-play sound module designed to take the hassle out of giving your model a realistic sound. Primarily designed for R/C boats, the sounds are also appropriate for small diesel rail locomotives.

The sound module has an input voltage range of 6V - 12V and requires NO programming or set up. It comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way. The unit comes complete with built in amplifier, wiring loom and a 80.0mm diameter waterproof speaker (83mm sq mounting plate). You simply install the unit in your model and go.

The included speaker is dust and water proof so it is safe to use outside. You should always install your speaker into a suitable enclosure to ensure the best power handling, frequency and bass response. The sound volume can be adjusted using a small screwdriver. The instruction manual contains helpful information on installation and use.

Micron stocks 3 versions of the digiSound module and you can hear a sample of the sound by clicking on the link:

The module has inputs for start/stop of the engine sound and for sounding a horn - both of these are simple short-to-ground type inputs so can be easily switched using Deltang receiver 'P' outputs.

Dimensions: 40mm x 35mm x 15mm. The connectors are on the top of the module and this increases the height to approx 30mm with the supplied plug and wiring harness. The overall height can be reduced to approx 20mm by carefully bending the header pins on the module through 90°.

The 80mm diameter speaker supplied with the sound module is too large for most railway scales, we have a selection of smaller speakers that can be used singly or in combination to fit the space available in a loco or trailing van/coach.

£ 63.60 Select sound type:

Click on image for a larger version.
MyLocoSound Large Scale Sound Module
(Top | Mtroniks digiSound)

A low cost sound module for the larger scale railways: O Gauge, SM32, Gauge 1 & 3 and G Scale. Highly adjustable to suit a wide variety of UK, European and USA locomotives.

Now available with Narrow Gauge / Light Industrial Diesel sounds.

To achieve great realism, MyLocoSound Universal uses a blend of recorded sounds from actual locos with the adjustability of synthesised sound. A handheld remote control is used to make all adjustments and to configure the sound module from outside the locomotive. This remote control is available separatley as only one is needed to work with any number of MyLocoSound modules.

There are 3 versions of the sound module for steam, diesel and electric locos (sound samples coming soon).

For steam, a load sensitive chuff is provided which chuffs hard when accelerating, softens when coasting and changes to an overrun sound when slowing down. This chuff can be triggered by the locomotive, if a chuff trigger is fitted, or can be synchronised to the motor so that the chuff timing is correct for the number of cylinders and the speed. Diesel soundcards offer both electric and mechanical transmissions with the engine sound also being load sensitive.

Dimensions: 55mm x 32mm x 12mm. Working voltage: 9V - 24V, 24V is an absolute maximum.

Whilst ideal for use with a Deltang receiver (e.g. Rx6), the MyLocoSound Large Scale Sound Module also works well with simple track powered model railways. On these, the sounds can be triggered in three ways:

  1. the steam whistle and diesel/electric horn can be set to sound automatically when the loco moves off and at timed intervals when running;
  2. trackside magnets and loco mounted reed switches can be used to trigger any of the sounds at selected positions on the railway;
  3. the remote control can be used to trigger any of the sounds, but only from short distances

Full setup and usage information can be found in the user manual or you can download a PDF copy of the steam, diesel or light industrial diesel or diesel or electric instructions.

£ 55.00 Select sound type:

IR Remote for sound module setup and volume control: £ 10.00


© Micron Radio Control