Spektrum DSM2/DSMX Transmit Modules

DT Tx1 | DT Tx2 | CB2 | Orange DIY

Click on image for a larger version.
DT Tx1 Short Range DSM2 Transmitter
(Top | DT Tx2 | CB2 | Orange DIY)

Tx1 is a simple short-range DSM2 transmitter. It is available in three versions: 'Tx1-J' with a built-in joystick allowing it to operate as a complete hand-held transmitter; 'Tx1-M' as a module for converting older transmitters to 2.4GHz DSM2 and 'Tx1-K1' which accepts a RS-232 control input. The 'M' version requires a PPM input, is switchable between JR and Futaba channel ordering and requires some DIY skills to install.

Download the user instuctions for: Tx1-J, Tx1-M or Tx1-K1.

Select type:

A battery lead (BL1) is available for connection of either Tx1 module to a single cell LiPo with 'UM' style connector:

Click on image for a larger version.
DT Tx2 DSM2 Transmitter Core
(Top | DT Tx1 | CB2 | Orange DIY)

Tx2 is module which can be used to make a DSM2 transmitter with 7 channels. The range is suitable for indoors and small outdoor sites. Each channel is controlled by a variable resistor or switch. The firmware supports trims, reversing, variable throws, mixing and inertia. It is a short-range transmitter that works with all DSM2 receivers.

Tx2 is ideal for DIY projects; it requires soldering external resistors, potentiometers, switches, battery and LED. It has features for control of model vehicles, especially trains: speed, direction, inertia and lights.

Tx2 supports several profiles which provide a combination of analogue and digital inputs. Most of these are designed for use in the Tx2x transmitters. Tx2 is supplied configured with Profile 1 and this can easily be changed. Click on the Profiles tab for details.

See Deltang Tx2 Transmitter Module for usage information and example circuits.

£ 16.00

Click on image for a larger version.
CB2 Transmitter Controller
(Top | DT Tx1 | DT Tx2 | Orange DIY)

CB2 is a transmit controller. It provides the same functionality as Tx2 but does not transmit. It outputs a 7 channel PPM stream with 3.1V swing and idle high. It is intended for use with a high power RF module to make a longer range transmitter. The image shows CB2 connected to an Orange RF module (this must be obtained separately).

CB2 can be used to upgrade any of the Tx2x model train controllers to higher power. Simply replace the Tx2 with a CB2 and connect to a Spektrum or Orange RF module (e.g. the Orange 2.4GHz DSM2/DSMX DIY Transmit Module).

£ 16.00

Click on image for a larger version.
Orange 2.4GHz DSM2/DSMX DIY Transmit Module
(Top | DT Tx1 | DT Tx2 | CB2)

The Orange DIY transmit module provides a simple way of building a full-range (100mW output) 2.4GHz R/C transmitter. It requires a PPM input signal - e.g. from the DT CB2 or the trainer socket of a non-2.4GHz transmitter.

As supplied, the module expects JR/Spektrum input channel ordering (TAER). The firmware can be be reloaded with a version that maps Futaba input channel order (AETR) and outputs JR/Spektrum channel order.

Input Channel Order:

There are currently 0 options selected. Click deselect to cancel all option selections.

Base Price: £ 39.00 Total Price: £ 39.00

© Micron Radio Control